Mechanical Homogenization of Biochar Porous Structures Using Two-Dimensional RVE: A Study of Finite Element Methods on the Relationship of Actual Porosity and Effective Elastic Modulus

Naufal Nabiha Luthfiantoro; Ahmad Atif  Fikri

doi:10.23960/jemit.453

Authors

Naufal Nabiha Luthfiantoro Mechanical Engineering, University of Malang, Malang
Ahmad Atif Fikri Mechanical Engineering, University of Malang, Malang

DOI:

https://doi.org/10.23960/jemit.453

Keywords:

mechanical properties, porosity, finite element method, homogenization, microstructure

Abstract

This study analyzes the mechanical response of porous biochar using a 2D FEM–RVE homogenization approach to investigate the effect of mesh-based actual porosity and microstructural arrangement on stiffness and stress concentration. Three types of RVEs (regular, shifted, and random) were simulated at several porosity levels for five biochar types (wood, bamboo, grass, RHB, and sludge) under the assumption of linear elastic material. Loading was applied using kinematic uniform boundary conditions (KUBC), and the effective elastic modulus ( ) was extracted from the homogenization response, while the maximum stress ( ) was recorded as an indicator of stress localization. Results show that decreases nonlinearly with increasing , and at the same porosity, more continuous microstructures retain higher stiffness. Normalization into relative modulus (E_rel) reveals overlapping trends across biochar types for the same RVE, allowing the influence of solid-phase properties to be separated from pore shape effects. These findings underscore the importance of using actual porosity and simultaneously evaluating global stiffness and local stress indicators in interpreting the mechanics of porous biochar.

Downloads

Download data is not yet available.

References

Bataillou, G., Lee, C., Monnier, V., Gerges, T., Sabac, A., Vollaire, C., & Haddour, N. (2022). Cedar wood-based biochar: Properties, characterization, and applications as anodes in microbial fuel cell. Applied Biochemistry and Biotechnology, 194(9), 4169–4186. https://doi.org/10.1007/s12010-022-03997-3

Behazin, E., Ogunsona, E., Rodriguez-Uribe, A., Mohanty, A. K., Misra, M., & Anyia, A. O. (2016). Mechanical, chemical, and physical properties of wood and perennial grass biochars for possible composite application. BioResources, 11(1), 1334–1348.

Biswas, P., & Ma, J. (2022). Spatial pore distribution: An approach to uncouple the strength–porosity trade-offs. Journal of Materials Science, 57(1), 411–421. https://doi.org/10.1007/s10853-021-06587-6

Chakma, P., & Luo, Y. (2024). Impact of regular and irregular pore distributions on the elasticity of porous materials: A microstructure-free finite element study. Materials, 17(18), 4490. https://doi.org/10.3390/ma17184490

Das, O., Sarmah, A. K., & Bhattacharyya, D. (2016). Nanoindentation assisted analysis of biochar added biocomposites. Composites Part B: Engineering, 91, 219–227.

De Carolis, S., Putignano, C., Soria, L., & Carbone, G. (2024). Effect of porosity and pore size distribution on elastic modulus of foams. International Journal of Mechanical Sciences, 261, 108661. https://doi.org/10.1016/j.ijmecsci.2023.108661

Gibson, L. J., & Ashby, M. F. (1982). The mechanics of three-dimensional cellular materials. Proceedings of the Royal Society A, 382(1782), 43–59. https://doi.org/10.1098/rspa.1982.0088

Guo, W., Wang, F., Wu, Y., Jiang, J., & Xu, W. (2023). New insights into freezing behavior of saturated and air-entrained porous media via a micromechanics-based thermo-hydro-mechanical model. Water Resources Research, 59(4). https://doi.org/10.1029/2022WR034211

Huang, W., Meng, F., Liu, J., & Wong, T. (2024). Development of compaction localization in Leitha limestone: Finite element modeling based on synchrotron X-ray imaging. Journal of Geophysical Research: Solid Earth, 129(8). https://doi.org/10.1029/2024JB028868

Judawisastra, N., Wicaksono, S., Dwianto, Y., Mahyuddin, A., Dirgantara, T., & Zuhal, L. (2025). Comprehensive prediction of the relative modulus of strut-based gyroid lattice structures employing an ML-based surrogate model. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 113(8). https://doi.org/10.1002/jbm.b.35613

Krzaczek, M., Nitka, M., & Tejchman, J. (2022). A novel DEM-based pore-scale thermo-hydro-mechanical model for fractured non-saturated porous materials. Acta Geotechnica, 18(5), 2487–2512. https://doi.org/10.1007/s11440-022-01746-8

Lee, J., et al. (2024). Engineering a hierarchy of disorder: A new route to synthesize high-performance 3D nanoporous all-carbon materials. Advanced Materials, 36(32). https://doi.org/10.1002/adma.202402628

Li, S., Xu, J., Liu, Z., & Zhang, Y. (2021). A 3D RVE-based computational homogenization approach for predicting the effective elastic properties of periodic porous materials. Computational Materials Science, 199, 110738. https://doi.org/10.1016/j.commatsci.2021.110738

Long, K., Chen, Z., Zhang, C., Yang, X., & Saeed, N. (2021). An aggregation-free local volume fraction formulation for topological design of porous structures. Materials, 14(19), 5726. https://doi.org/10.3390/ma14195726

Lv, W., Hu, J., Liu, J., Xiong, C., & Zhu, F. (2023). Porosity effect on the mechanical properties of nano-silver solder. Nanotechnology, 34(16), 165701. https://doi.org/10.1088/1361-6528/acb4f3

Manna, K., et al. (2025). Microstructural characterization of ball-milled biochar and its reinforcing efficiency in biobased thermoplastic polyurethane. ACS Sustainable Resource Management, 2(9), 1719–1730. https://doi.org/10.1021/acssusresmgt.5c00225

Menke, H., Maes, J., & Geiger, S. (2021). Upscaling the porosity–permeability relationship of a microporous carbonate for Darcy-scale flow with machine learning. Scientific Reports, 11(1). https://doi.org/10.1038/s41598-021-82029-2

Palomar, I., & Barluenga, G. (2022). Acoustic assessment of multiscale porous lime–cement mortars. Materials, 16(1), 322. https://doi.org/10.3390/ma16010322

Pingaro, M., Reccia, E., & Trovalusci, P. (2019). Homogenization of random porous materials with low-order virtual elements. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 5(3), 030905. https://doi.org/10.1115/1.4043475

Puri, L., Hu, Y., & Naterer, G. (2024). Critical review of the role of ash content and composition in biomass pyrolysis. Frontiers in Fuels, 2, 1378361. https://doi.org/10.3389/ffuel.2024.1378361

Sadek, H., et al. (2024). Well-ordered bicontinuous nanohybrids from a bottom-up approach for enhanced strength and toughness. Nano Letters, 24(35), 11020–11027. https://doi.org/10.1021/acs.nanolett.4c03157

Saunier, J., Chinnayya, A., Kaeshammer, E., Reynaud, M., & Genetier, M. (2024). Mesoscale modeling of the shock-to-detonation transition of pressed HMX. Propellants, Explosives, Pyrotechnics, 49(9). https://doi.org/10.1002/prep.202400125

Somboon, S., Schlichenmaier, S., Thumanu, K., Pakawanit, P., Yodda, S., Sukitprapanon, T.-S., & Lawongsa, P. (2025). Transformations in physicochemical properties and pore structure of biochar derived from rice straw revealed by synchrotron techniques. Scientific Reports, 15(1), 23641. https://doi.org/10.1038/s41598-025-08772-y

Thompson, E., Tomenchok, K., Olson, T., & Ellis, B. (2021). Reducing user bias in X-ray computed tomography-derived rock parameters through image filtering. Transport in Porous Media, 140(2), 493–509. https://doi.org/10.1007/s11242-021-01690-3

Tian, Y., Zhan, W., Jamal, A., & Dini, D. (2022). On the microstructurally driven heterogeneous response of brain white matter to drug infusion pressure. Biomechanics and Modeling in Mechanobiology, 21(4), 1299–1316. https://doi.org/10.1007/s10237-022-01592-3

Wang, Q., Ji, Y., Sridharan, M. M., Lang, L., Zou, Y., Kirk, D. W., & Jia, C. Q. (2025). Unlocking extreme anisotropy in monolithic biochar hardness. Biochar X, 1(1). https://doi.org/10.48130/bchax-0025-0007

Wang, Z., Ding, X., Liu, J., & Fu, L. (2024). Numerical simulations on compression behaviors of laminated shale based on digital image technology and the discrete element method. Scientific Reports, 14(1). https://doi.org/10.1038/s41598-024-66333-1

Xu, X. (2023). Grain-level numerical simulations for the effective elasticity of weakly cemented sandstones. ACS Omega, 8(37), 33610–33621. https://doi.org/10.1021/acsomega.3c03802

Zhang, M., Xu, M., Li, J., Shi, W., & Chen, Y. (2022). Compressive behavior of hollow triply periodic minimal surface cellular structures manufactured by selective laser melting. Rapid Prototyping Journal, 29(3), 569–581. https://doi.org/10.1108/RPJ-04-2022-0128

Zhang, Z., Qi, Y., Wei, B., Bao, H., & Xu, Y. (2023). Application strategy of finite element analysis in artificial knee arthroplasty. Frontiers in Bioengineering and Biotechnology, 11. https://doi.org/10.3389/fbioe.2023.1127289

Zhou, Y., Gao, J., Yang, X., Ni, H., Qi, J., Zhu, Z., Yang, Y., Fang, D., Zhou, L., & Li, J. (2024). Recent progress in sludge-derived biochar and its role in wastewater purification. Sustainability, 16(12), 5012. https://doi.org/10.3390/su16125012

Zhuang, L., Shin, H., Yeom, S., Pham, C., & Kim, Y. (2022). A novel method for estimating subresolution porosity from CT images and its application to homogeneity evaluation of porous media. Scientific Reports, 12(1). https://doi.org/10.1038/s41598-022-20086-x

Zickler, G. A., Schoberl, T., & Paris, O. (2006). Mechanical properties of pyrolysed wood: A nanoindentation study. Philosophical Magazine, 86, 1373–1386.