Rancang Bangun Mesin Penggulung Lilitan Kawat Transformator Otomatis Berbasis Arduino Uno

Denny Irfan; Junaidi Junaidi; Arif Surtono

doi:10.23960/jemit.v2i3.63

Authors

Denny Irfan Universitas Lampung
Junaidi Junaidi Jurusan Fisika, Universitas Lampung, Bandar Lampung, Indonesia, 35141
Arif Surtono Jurusan Fisika, Universitas Lampung, Bandar Lampung, Indonesia, 35141

DOI:

https://doi.org/10.23960/jemit.v2i3.63

Keywords:

Transformer, arduino uno, coil, tachometer, koker.

Abstract

Research on application of the design an Arduino Uno-based automatic transformer wire winding machine has been carried out. The research aim was to make an automatic winding machine using wire coils that can be adjusted for rotation speed and high accuracy of the number of turns. In testing system, the enamel wire was wrapped around with a different number of turns, that is 200;400;600;800;1000 turns. The calibration method in this study was carried out manually, that is recounting the turns on the koker that had been wrapped using an automatic winding machine. The speed of the winding machine is calibrated using a tachometer. The results of the calculation of the average rolling accuracy of 99,73%.

Downloads

Download data is not yet available.

References

Ahyar, M., & Irdam. 2019. Jurnal Keteknikan dan Sains (JUTEKS) – LPPM UNHAS, Juni 2018 23. Jurnal Keteknikan Dan Sains, 1(1), 23–31.

Anonimous A. 2018. Working With L298N DC Motor. http://fritzing.org/projects/working-with-L298N-dc-motor-driver. Diakses pada 20 Oktober 2018. Pukul 12.54 WIB.

Anonimous B. 2019. Rangkaian Programmer pada Arduino UNO dan Nano. https://elektrologi.iptek.web.id/rangkaian-programmer-pada-arduino-unodan - nano/. Diakses pada 20 oktober 2019. Pukul 09.26 WIB.

Anonimous C. 2011. Sensor Optocoupler. http://www.soselectronic.com. Diakses pada 21 Oktober 2019 pukul 10.08 WIB.

Arifin, J., Zulita, L. N., & Hermawansyah. 2016. Perancangan Murottal Otomatis Menggunakan Mikrokontroller Arduino Mega 2560. Jurnal Media Infotama, 12(1), 89–98.

Betha Sidik., 2012, Pemrograman Web dengan PHP, Informatika, Bandung.

Fahmi, A.H. 2017. Mengatur Kecepatan Motor Dc Spindle Berbasis Pwm (Pulse Width Modulation) Pada Mesin Cnc Portable, Tugas Akhir, Fakultas Vokasi. Institut Teknologi Sepuluh Nopember Surabaya.

Fatoni, A., Nugroho, D. D., dan Irawan, A. 2015. Rancang Bangun Alat Pembelajaran Microcontroller Berbasis ATmega 328 Universitas Serang Raya. Jurnal Prosisko,2(1), 10-18.

Hamed, B. 2011. Design and Implementation of Stair Climbing Robot for Rescue Application. Journal of Computer and Electrical Engineering,3(3), 461-468.

Hikmah, N. F. 2012. Rancang bangun Syringe Pump Berbasis Mikrokontroler ATmega8535 Dilengkapi Okulasi. Tugas Akhir, Program sarjana Fakultas Sains dan Teknologi. Universitas Airlangga. Surabaya.

Iman Fushilat, Yoyo Somantri & Maman Somantri. 2014. Mesin Gulung Transformator Otomatis Berbasis Mikrokontroler. Jurnal Keteknikan Dan Sains. 13(1), 23–34.

Ingole, M. A. N. 2016.Arduino based Solar Tracking System. International Conference on Science and Technology for Suistainable Development. ISSN: 2348-8549. 61-66.

Jones, L.D. 1995. Electronic Instrumens and Measurement. Second Edition. Prentice Hall International, Inc.

Nenny, Angraeni. 2010. Faraday dan Kelistrikan. Elex Media Komputindo, Jakarta.

Prakasa, G. N. 2017. Prototipe Kunci Pintu Menggunakan Motor Stepper Berbasis Arduino Mega 2560 Dengan Perintah Suara Pada Android. Tugas Akhir, Program sarjana Fakultas Teknik. Universitas Lampung. Bandar Lampung.

Safitri, D. M., Astriaty, A. R., & Rizani, N. C. 2006. Human Reliability Assessment dengan Metode Human Error Assessment and Reduction Technique pada Operator Stasiun Shroud. Jurnal Rekayasa Sistem Industri Vol. 4, No. 1.

Sulasno. 2009. Teknik Konversi Energi Listrik dan Sistem Pengaturan. Graha Ilmu, Yogyakarta

.

Virgala, I., Michal, K., Alexander, G., dan Tomas, L. 2015. Control Of Stepper Motor by Microcontroller. Juornal Of Automation and Control, 3(3), 131-134.

Yakob, Liklikwatil. 2014. Mesin-mesin Listrik Untuk D3. Deepublish, Yogyakarta.

Yandri, V. R., & Desmiwarman. 2016. Untuk Kumparan Motor Menggunakan Mikrokontroller Atmega328 Sebagai Unit Pengendali Design of Roller Wire E-mail Coils using Microcontroller Atmega 328 as Motor Control Unit. Jurnal Teknik Elektro ITP, 5(2252), 16–21.

Zukhri, Zainudin. 2007. Analisis Rangkaian. Graha Ilmu, Yogyakarta.

Zulhal dan Zhanggischan. 2004. Prinsip Dasar Elektronika. PT. Gramedia Pustaka Utama. Jakatra.