Furnace Control System Using the TCN4S Temperature Controller
DOI:
https://doi.org/10.23960/jemit.v3i3.104Keywords:
Autonics TCN4S Temperature Controller, SSR (Solid State Relay), Thermocouple SensorAbstract
In the academic world, especially in research activities at the University of Lampung, there are many things that the application of research requires an instrumentation system design to support these research activities. One example is used to melt metal or other materials. Therefore, this research aims to make a furnace using the Autonics TCN4S temperature controller. The basic configuration of a temperature regulation system consisting of temperature control is TCN4S, SSR (Solid State Relay), and Thermocouples. The results of this study indicate that the maximum temperature that can be achieved is 383°C within 710 seconds in an open space with an electric power of 1032.48 Watt and a strong current of 4.7 A so that the consumption of electricity consumption in the furnace is 0.2 KWh.
Downloads
References
Arif, Z., & Kamaruzzaman, T. (2015). Simulasi Distribusi Aliran Temperatur Pada Lapisan Dinding Tungku ( Furnace ) Dengan Menggunakan Program Ansys 5 , 4. Jurnal Ilmiah JURUTERA, 02(01), 096–101.
Emda, A. (2017). Laboratorim Sebagai Sarana Pembelajaran Kimia Dalam Meningkatkan Pengetahuan Dan Keterampilan Ilmiah. Lantanida journal, Vol 5.No 1.
Huda, S. N. (2011). Furnace Dengan Menggunakan Sensor Termokopel Tipe-K Berbasis Mikrokontroler Atmega 16 Syahrial Nurul Huda Furnace Dengan Menggunakan Sensor Termokopel Syahrial Nurul Huda. FMIPA Universital Indonesia.
Tadeus, D. Y., & Setiono, I. (2018). Deskripsi Teknis Pengendali Temperatur Industri Sebagai Bagian Dari Sistem Regulasi Temperatur. Gema Teknologi, 20(1), 1. https://doi.org/10.14710/gt.v20i1.21075.
Downloads
Published
Issue
Section
License
Copyright (c) 2022
This work is licensed under a Creative Commons Attribution 4.0 International License.
