Design and Build Entry Access Restriction System Laboratory Using Radio Frequency Identification (RFID) and Keypad Technology

Ahmad Aziz  Arrizal; Sri Wahyu Suciyati; Arif Surtono; Gurum Ahmad Pauzi

doi:10.23960/jemit.v3i2.101

Authors

Ahmad Aziz Arrizal Department of Physics, University of Lampung, Bandar Lampung, Indonesia, 35141
Sri Wahyu Suciyati Department of Physics, University of Lampung, Bandar Lampung, Indonesia, 35141
Arif Surtono Department of Physics, University of Lampung, Bandar Lampung, Indonesia, 35141
Gurum Ahmad Pauzi Department of Physics, University of Lampung, Bandar Lampung, Indonesia, 35141

DOI:

https://doi.org/10.23960/jemit.v3i2.101

Keywords:

RFID, Keypad, Arduino Mega, Solenoid Lock

Abstract

The laboratory access restriction system has been realized using RFID and keypad technology, based on an Arduino microcontroller as a processor. The system has recorded users who entered the room by identifying the RFID tag (transponder) used to open the door from the outside. As for access outside the room, the user only needs to enter the password as identification data on the keypad, and the system would reduce the number of room users and open the door. The output of this system was a solenoid lock which functions as an electronic lock and an LCD to display the status of the RFID reading. The test results showed that the system created can work well. RFID Reader was able to read tags with a maximum distance of 4 cm. The program counter functions well, so the number of users was limited to 15 (50% of the maximum capacity).

Downloads

Download data is not yet available.

References

Darmawan, J., Andriani, A., Usnila, R., Ledya, K., Fitria, Y., Armanawi, & Bakhtiar. (2020). Praktik Baik Masa Pandemi. Sukabumi-Jawa Barat: CV. Jejak.

Decaprio, R. (2013). Tips Mengelola Laboratorium Sekolah. Yogyakarta: Diva Press.

Febriyanto, E., Padeli, & Suprayogi, D. (2019). Prototype Sistem Smart Lock Door dengan Timer dan Fingerprint Sebagai Alat Autentikasi Berbasis Arduino Uno pada Ruangan. Jurnal Informatika, 19(1), 10–19.

Hazarah, A. (2017). Rancang Bangun Smart Door Lock Menggunakan QR Code dan Solenoid. Jurnal Teknologi Informatika Dan Terapan, 04(01), 5–10.

Margarini, D., Suciyati, S. W., Surtono, A., & Pauzi, G. A. (2021). Rancang Bangun Prototipe Keamanan Ruang Laboratorium dengan Pintu Otomatis Menggunakan Sensor Suhu MLX90614 Berbasis Arduino Atmega 2560. Journal of Energy, Material, and Instrumentation Technology, 2(4), 69–77.

Nizam. Surat Edaran Nomor 4 Tahun 2021 Tentang Penyelenggaraan Pembelajaran Tatap Muka Tahun Akademik 2021/2022 (2021). Jakarta: Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi.

Prakasa, G. N. (2017). Prototipe Kunci Pintu Menggunakan Motor Stepper Berbasis Arduino Mega 2560 dengan Perintah Suara pada Android. Bandar Lampung: Universitas Lampung.

Ramady, G. D., & Juliana, R. (2019). Sistem Kunci Otomatis Menggunakan RFID Card Berbasis Mikrokontroler Arduino Uno R3. ISU Teknologi STT Mandala, 14(1), 28–32.

Sandar, S., & Oo, S. A. N. (2019). Development of a Secured Door Lock System Based on Face Recognition using Raspberry Pi and GSM Module. International Journal of Trend in Scientific Research and Development - IJTSRD, 3(5), 357–361.

Simanihuruk, F. N. (2020). Rancang Bangun Pengaman Pintu Otomatis Menggunakan E-KTP dan Sidik Jari (Fingerprint FPM 10A) Berbasis SMS Gateway. Medan: Universitas Sumatera Utara.

Suwartika, R. K., & Sembada, G. (2020). Perancangan Sistem Keamanan Menggunakan Solenoid Door Lock Berbasis Arduino Uno pada Pintu Laboratorium di PT. XYZ. Jurnal E-KOMTEK (Elektro-Komputer-Teknik), 4(1), 62–74.

Tawakal, M. I., & Ramdhani, Y. (2021). Smart Lock Door Menggunakan Akses E-KTP Berbasis Internet of Things. Jurnal Responsif, 3(1), 83–91.

Wendanto, W., Salim, D. J. N., & Putra, D. W. T. (2019). Rancang Bangun Sistem Keamanan Smart Door Lock Menggunakan E-KTP ( Elektronik Kartu Tanda Penduduk ) Dan Personal Identification Number Berbasis Arduino Mega R3. Go Infotech: Jurnal Ilmiah STMIK AUB, 25(2), 133–142.